Hiding The Display - Omron ZN-DPX21-S Series User Manual

5. Measurement and Recording (Unit Operation)

5.7 Hiding the Display

During operation in RUN mode, if no operation is performed in 5 seconds, the display may
disappear. In this case, measurement operation mode is set to be sleep mode and the sleep
display mode is OFF. Recording continues during recording even if the display is not shown.
Press any key to restart the display. Pressing the key when the display is not shown can only
activate the display. To execute functions allocated to the key, press the key again after the
display is shown.
Refer to: 4.2.4(3) Measurement operation mode (MODE)， 4.2.4(13)Display mode at sleep (SDISP)
5-8