Omron ZN-DPX21-S Series User Manual page 36

(3) Setting ETC and IP to "DISP"
Display (upper
line/ lower line)
MODE
NET
("FUN" blinks)
↓
▼ or ▲ key
ETC
OFF
↓
SET/REC/STOP key
ETC
OFF
↑ blinks
↓
▼ or ▲ key
ETC
DISP
↑ blinks
↓
SET/REC/STOP key
ETC
DISP
↓
▼ or ▲ key
IP
OFF
↓
SET/REC/STOP key
IP
OFF
↑ blinks
↓
▼ or ▲ key
IP
DISP
↑ blinks
↓
SET/REC/STOP key
IP
DISP
Press the ▼ or ▲ key until ETC is displayed on the upper section of the
display.
When pressing the SET/REC/STOP key, "OFF" in the lower section
blinks.
Press t the ▼ or ▲ key to display DISP.
Press the SET/REC/STOP key to confirm DISP. Blinking stops.
Press the ▼ or ▲ key to display IP on the upper section.
Press the SET/REC/STOP key to blink OFF at the lower section.
Press the ▼ or ▲ key to display DISP.
Press the SET/REC/STOP key to confirm DISP. Blinking stops.
Continue to IP address settings.
3-9
3. Check and Preparation
Operation