List Of Displayed Errors - Omron ZN-DPX21-S Series User Manual

7.2 List of Displayed Errors

Display
Upper/lower
DATA Failed to write
E1100 measured data
SEN
Sensor error
E2000
NO SD SD memory card not
E3000 inserted
BATLO Unable to access SD
E3001 memory card
SDLCK SD memory card
E3002 write prohibited
SD ER SD memory card
E3003 recognition error
Air Particle Sensor
PDINT (ZN-PD□□-S□)
E4000
communication
initialization error
Air Particle Sensor
(ZN-PD□□-S
PD-S
□)measurement
E4001
acquisition error
RESTR Invalid setting file
E5000 data
BCKUP Failed to write the
E5001 setting file
RESTR Failed to read the
E5002 setting file
HARD
Hardware error
E****
Content
Failed to write the recorded data to the SD memory card
due to no free space or card being removed during
writing. Insert the writable SD memory card. Hold the
MODE key for 3 seconds or more to release the error
display.
The sensor Head is not connected. Connect the Sensor
Head properly.
SD memory card is not inserted. Insert the writable SD
memory card.
Hold the MODE key for 3 seconds or more to release the
error display.
Unable to access to the SD memory card due to low
battery voltage. Replace the battery or connect to the AC
adapter.
Hold the MODE key for 3 seconds or more to release the
error display.
Writing to the SD memory card is prohibited. Insert the
writable SD memory card.
Hold the MODE key for 3 seconds or more to release the
error display.
Failed to recognize the SD memory card. Insert an
appropriate SD memory card.
Hold the MODE key for 3 seconds or more to release the
error display.
Air Particle Sensor cannot be initialized. Connect with Air
Particle Sensor properly.
Hold the MODE key for 3 seconds or more to release the
error display.
Failed to obtain the measured value from the Air Particle
Sensor. Connect with the Air Particle Sensor properly.
Hold the MODE key for 3 seconds or more to release the
error display.
The setting data within the SD memory card is invalid due
to invalid model type or setting value.
Hold the MODE key for 3 seconds or more to release the
error display.
Failed to write to the SD memory card of the setting file
due to no free space or writing prohibited. Insert a
writable SD memory card.
Hold the MODE key for 3 seconds or more to release the
error display.
There is not setting file in the SD memory card. Insert the
SD memory card in which the setting file has been
written.
Hold the MODE key for 3 seconds or more to release the
error display.
There may be a hardware error. Please contact the
distributor or OMRON representative office to inform the
displayed error code.
7-7
Action to be taken
7. Appendix