System Connection; Automatic Route Selection (Ars); Call Forwarding - To Co Line; Call Transfer; Unscreened - To Extension - Panasonic KX-TD816CE Installation Manual

F T
EATURE ITLE
2.4.9

System Connection

Automatic Route
Selection (ARS)
Call Forwarding – to
CO Line
Call Transfer;
Unscreened – to
Extension
Direct Dialling In
(DDI)
Direct Inward System
Access (DISA)
46
M
ANUAL
S
ECTION
The first note has been changed as follows.
(Installation Manual)
Section 2
• System Connection may take a while (5 to 15 minutes
depending on your software version) to be completed
after the power is turned on.
Confirm the connection between the systems by
making a call from a Master Unit Ext. to a Slave Unit
Ext.
The following condition has been added.
(Installation Manual)
Section 3
• ARS with DTMF: When making a call to an ISDN
line using the memory dialing, and the number has a
pause in it, the number after the pause will be sent to
the line as DTMF signals. This function is useful when
accessing a special network service which can be
accessed only by the DTMF signaling. This function is
enabled or disabled in program [990], "System
Additional Information, Field (42)."
The first condition has been changed as follows:
(Installation Manual)
Section 3
• Types of calls which are forwarded by this function are:
The following condition has been added to the
(Installation Manual)
Section 3
Conditions section.
• An outside call can be transferred directly to a Uniform
Call Distribution (UCD) group so that an idle
extension is automatically hunted by UCD. If all
extensions in a UCD group are busy, the incoming
outside call will be handled by the UCD Time Table.
This feature has been changed to the new one. See page
(Installation Manual)
Section 3
49.
This feature has become available for KX-TD816 users.
(Installation Manual)
Section 3
Please ignore "*: Available for the KX-TD1232 only"
marked for "DISA", "modem" and other related items in
the main Installation Manual and other additional
manuals.
In the Conditions section, the sixth condition has been
changed as follows.
• This system can store up to 32 programmable DISA
user codes. Each code should be unique. It is
possible to assign a Class of Service number to each
code. The Class of Service of the code defines Toll
Restriction level.
R
EVISION
CO calls – DIL 1:1; DISA; Intercept
Intercom calls – Extension; Transfer