Angle Position Power Supply
NOTICE
Short circuit
Twist the connector over a rotation angle of +65°/ -90°
if the connector points in the direction of AS, or +30°/
-65° if the connector points in the direction of NS!
Short circuit, body short circuit or malfunction due to
loosened strands at the soldering points are possible.
Turn the plug a maximum of +65°/ -90° (AS), or
X
+30°/ -65° (NS)!
Connector faces in direction of drive shaft
Connector faces against drive shaft
Change the angle position of the motor connector
X
step by step by direct turning. There are no screws
that need to be loosened or tightened.
Deviating angle positions are possible on request.
X
Version 06-02-2023
Winkelposition Leistungsversorgung
ACHTUNG
Kurzschluss
Verdrehen des Anschlußsteckers über einen Drehwin-
kel von +65°/ -90°, wenn der Stecker in Richtung AS
zeigt, bzw. +30°/ -65°, wenn der Stecker in Richtung
NS zeigt!
Kurzschluss, Körperschluss oder Fehlfunktion durch
gelöste Litzen an den Lötstellen sind möglich.
Drehen Sie den Stecker maximal um +65°/ -90°
X
(AS), bzw. +30°/ -65° (NS)!
Stecker in Richtung Antriebswelle
Stecker entgegen Antriebswelle
Ändern Sie die Winkellage des Motorsteckers schritt-
X
weise durch direktes Drehen.
Abweichende Winkelpositionen sind auf Anfrage mög-
X
lich.
BG 45
dPro
Page/Seite 39 / 53