Table of Contents
Advertisement
Additional functions and Individual settings
Additional functions
Select the desired additional functions with the
the chosen function with the Select button, e.g. select the
– For Cottons Eco programme, touch
– Touch
Option
button again until
– Touch Select button.
Intensive indicator flashes and related
the function has been preselected. If you need to deselect the function immediately, touch the
Select button again.
– If no other action, the
Intensive indicator stops flashing and comes on after several seconds.
Additional function is selected successfully. Setting of
Quick
Less Iron
Water Plus
Rinse Plus
Intensive
Prewash
Start/Reload
For starting or pausing the washing/drying programme.
Signal volume
(for button signal and information signal)
1. Activate setting
mode for signal
volume
Set to
Off
for at least
5 seconds
Button signals
2. Set volume for ...
Touch
Dealy
button and set
volume*
*
If required, set repeatedly.
Childproof lock
Programme will not be changed by accidental operation.
To activate the childproof lock:
– After the programme starts or finish in time is activated
Dealy button for 5 seconds;
– Release when the
symbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the
the childproof lock.
To deactivate the childproof lock:
– Touch the
Dealy button until the
– Release the button.
symbol flashes if the programme has been changed while childproof lock is activated.
If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated, the running programme will be halted.
See also Programme overview
Page
Option
button and then activate (or deactivate)
Intensive function:
Option
button,
Less Iron indicator flashes.
Intensive indicator flashes.
indicator comes on. It means
Rinse Plus.
Page 10
Shorten the washing time. For slightly soiled items.
Special spin sequence with subsequent fluffing. Gentle final
spin – residual moisture in the laundry increased slightly.
High water level to achieve better rinse result.
Additional rinse cycles, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
Select
Rinse Plus
by
Option
button. Then touch Select
to activate the function and touch Select button for desired
rinse cycles (max. 3 cycles).
Extends the washing time for a more intensive washing
of heavily soiled items.
For heavily soiled laundry. Prewash at max. 30 °C.
+
1 step
Touch
1 step
clockwise
°C Temp.
clockwise
button and hold
Information signals
direct
1 step
Touch
Dealy
clockwise
button and set
volume*
Page 9, press and hold the
Start/Reload indicator remains on to remind you to deactivate
symbol turns off.
Information on the display
7
other displays
Release the
Safety instructions
°C Temp.
button.
– Read and follow the operating and Installation and maintenance instructions and all other information
enclosed with the washer dryer.
– Retain documents for subsequent use .
Risk of electric shock
Risk of death
Set to
Off
Risk of suffocation
Risk of poisioning
Risk of explosion
Risk of injury
10
Please close the door immediately because of rising water level.
In pause status
and
are displayed alternately.
Door is locked due to safety reasons (water level and/or temperature are too high).
For washing programme: In pause status,
If you need to open the door, wait for the temperature to drop or drain the water (e.g.
select
Rinse/ Spin
or
Empty programme).
For drying programme: If you need to open the door, wait for the temperature to drop
or set 15 minutes time dry programme to cool down the laundry.
If
comes up after the drying programme ends frequently:
– Clean the cool air inlet filter.
Installation and maintenance instructions, Page 9
– Run the Fluff Clean
(cold) programme without laundry.
Door cannot be locked/unlocked due to high temperature of the door lock. Keep the
machine switched on for about 1 minute. Then the machine can be locked/unlocked
again.
Door cannot be opened due to the high temperature after the drying programme.
The cooling down process will continue until this display disappears and the door can
be opened.
Flashing (no water supply):
Tap turned on?
Inlet filter blocked? Clean filter
Installation
and maintenance instructions, Page 8
Supply hose kinked or blocked?
Clean drain pump
Installation and maintenance instructions, Page 8;
outlet pipe/drainage hose blocked.
Hold the
Dry button for 3 seconds to clear this display.
– Clean the cool air inlet filter.
Installation and maintenance instructions, Page 9
– Run the Fluff Clean
(cold) programme without laundry.
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer service.
– Never pull out the mains plug by tugging the power cord.
– Never insert/pull out the mains plug with damp hands.
For worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washer dryer door. This will prevent children from
locking themselves in and risking their lives.
– Keep packaging, plastic film and packaging parts out of the reach
of children.
– Keep detergents and care products out of the reach of children.
– Items of laundry pretreated with cleaning agents containing solvents, e.g.
stain remover/cleaning solvents may lead to an explosion after being loaded
into the washer dryer.
First rinse items of laundry thoroughly by hand.
– Washer dryer door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washer dryer.
– Do not lean on the open washer dryer door.
– Do not touch the drum in case it is still spinning.
– Ensure that the pump cap is screwed on while the machine is running to
prevent the escape of water and contact with moving pump parts.
– If a drying programme was interrupted, the washer dryer and the laundry
may be very hot, select Intensive Dry or Low Heat Dry and set 15 minutes
programme to cool down the laundry, then remove the laundry.
and
are displayed alternately.
On (low water pressure):
Only information. No influence on the
programme process. The programme
duration will be prolonged.
11
Advertisement
Table of Contents
