Master Code; Sub-Master Code; User Code; Technician Code - CODELOCKS KL1000 Programming And Operating Instructions

MASTER CODE

The Master Code can:
Open the lock
Change the Master Code
Set / Change / Delete the Sub-Master and User Code
Select between Private and Public Functions
Activate / Deactivate Technician Code

SUB-MASTER CODE

The Sub-Master Code can:
Open the lock
Change the Sub-Master Code
Set / Change / Delete the User Code

USER CODE

The User Code can:
Open the lock
Change the User Code

TECHNICIAN CODE

The Technician Code can:
Open the lock
A code cannot be programmed into more than one level.

LOST CODE PROCEDURE

Note: The procedure requires the door to be open.
Remove the rear-fixing bolt and swing the lock over the edge of the door to reveal the battery compartment.
Remove one battery.
Press and hold the 1 button, replace the battery, the Blue LED will flash twice, release the 1 button. Within
three seconds press the 1 button three times. The Blue LED will flash twice and the lock will have reverted
to the factory Master Code 11335577 and all other stored settings will be erased.

PENALTY TIME

Entering three incorrect codes will cause the lock to shutdown for 10 seconds.

BATTERY POWER

The KitLock should provide well in excess of 15,000 openings, of 4 seconds each, from 2 x AAA 1.5v
cells.
https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000-2017-programming-and-operating-instructions