Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CODELOCKS 4OOO ELECTRONIC
Summary of Contents for CODELOCKS 4OOO ELECTRONIC
- Page 1 INSTALLATION INSTRUCTIONS 5OOO ELECTRONIC 4OOO ELECTRONIC...
-
Page 2: Box Contents
Box Contents Check the contents of the box are correct according to the model 4010 4020 5010 5010BB 5020 Front Plate 4000 Front Plate 5000 Back Plate 4000 Back Plate 5000 Back to Back Fixing Plates Lever Handles 4/5000 Gaskets (x2) Sprung Spindle Sprung Spindles (x3) –... -
Page 4: Operations Check
OPERATIONS CHECK SPECIAL FIXING NOTE You should familiarise yourself with the operation of the lock and REMOTE RELEASE OPTION Cables are provided for the REM 1 and REM 2 terminals on the check that all parts work properly. circuit board. (Fig 1 below). Remove the battery cover from the back plate and install the 4 x AA cells supplied. - Page 5 CL4010, CL5010, CL5010BB LATCH FUNCTION Outside handle turns freely without operating the latchbolt. When the code is entered the Blue light flashes and the handle will retract the latchbolt. The latch automatically locks the door when closed. The key will open the door without the code. CL4020, CL5020 ANTI-PANIC LOCK FUNCTION Outside handle and key functions as...
- Page 6 INSTALLATION OF CL4010 AND CL5010 LOCKS Take time to be precise 1 Lightly mark a height line on the edge and both faces of the door and on the door jamb, to indicate the top and finish the job of the lock when fitted. Crease the template along one of the dotted lines (60mm (2 ”) or 70mm (2 ”) quicker.
- Page 7 See page 9 for CL5010BB and page 10 for CL4020 and CL5020 Installation Instructions 13 FOR CL5010 LOCKS ONLY. 7 FOR CL5010 LOCKS ONLY. Check that the spindle turns freely, and the latch retracts and Screw the cable tube into the front plate, passing the cable through the projects smoothly, with the alignment insert in place.
- Page 8 INSTALLATION OF CL5010BB INSTALLATION OF CL4010 AND CL5010 LOCKS CONTINUED 15 FOR CL4010 LOCKS ONLY. 1 Lightly mark a height line on the edge Using the inside handle boss check that the spindle moves freely, and that the latch and both faces of the door and on the retracts and projects smoothly.
- Page 9 5 Fix the latch with the wood screws, with the bevel towards the 12 Fit the cylinder cover and lever handle to both keypads. doorframe. 13 Enter the factory Master Code #1234 to test the lock on both 6 Fit the latch support post on the inside of the outer front plate, in sides of the door.
- Page 10 INSTALLING THE ANTI-PANIC MORTICE LOCK FOR INSTALLING THE ANTI-PANIC MORTICE LOCK FOR MODELS CL4020 AND CL5020 MODELS CL4020 AND CL5020 IMPORTANT The Anti-Panic Mortice Lock has features 1 Lightly mark a height line on the which are not found in most other locks and so it is edge and both faces of the door, and recommended that you familiarise yourself with them the door jamb, to indicate the top of...
- Page 11 6 Check that the 2 screws have been removed from the follower 13 Position the front plate over the spindle, passing the cable through the on the outside of the door. DO NOT remove the screws from door. Put both parts of the back plate in position with the spindle both sides of the follower.
- Page 12 ANSI/BHMA A156.2 A156.25 CODELOCKS INC - US CODELOCKS LTD - UK 2930 - B College Avenue, Castle Industrial Park, Costa Mesa, Kiln Road, Newbury, CA 92626. Berkshire, RG14 2EZ. UNITED KINGDOM Tel + 44 (0) 1635 239645 Tel +1 714 979 2900...
Need help?
Do you have a question about the 4OOO ELECTRONIC and is the answer not in the manual?
Questions and answers
Hi, I have a CL4010 SS can you give me a list of the operation codes. To lock it, unlock it ect.
The factory Master Code for the CODELOCKS 4000 Electronic is #1234. Entering this code will unlock the lock. Program 11 can be used to re-lock the lock before the automatic 30-minute re-lock period ends.
This answer is automatically generated