CODELOCKS KL1000 Programming And Operating Instructions

Codelocks Support
KL1000 Classic Programming and Operating
Instructions [GB]

CODES - THE BASICS

The KitLock has four code levels available:
a. Master Code
b. Sub-Master Code
c. User Code
d. Technician Code
The KitLock is supplied with two factory set codes:
Master Code: 11335577
User Code: 2244
When fitted, immediately change the Master Code and User Code.
All Master Codes and Sub-Master codes are 8 digits long.
All User Codes are 4 digits long.
All Technician Codes are 6 digits long.
The lock 'open' time is set at 4 seconds.

FUNCTIONS

Before programming, select the most appropriate function for the application
A) PRIVATE USE
Important Note: This is the default function and is already pre-programmed in new locks. This is the most
common function and is used where the same code will be repeated used.
B) PUBLIC USE
The user enters their own personal 4 digit code. This locks the lock. The same code is entered once only to open
the lock before being erased and ready for the next new user. This function is used for short term, multi
occupancy applications, e.g. a locker in a leisure centre.

OPERATING INSTRUCTIONS

Note: The KitLock has a 10 button keypad and a # button. The # button is hidden beneath the handle when in the
locked position.
CODES - The lock has the following code levels:
https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000-2017-programming-and-operating-instructions