Advertisement
Table of Contents
- 1 Codes - the Basics
- 2 Operating Instructions
- 3 Unlock Time/Penalty Time
- 4 Reverting to Factory Setting
- 5 Remote Release Option
- 6 Battery Power
- 7 Low Battery
- 8 Battery Failure Override
- 9 Removal of Front-Load Cylinders
- 10 Changing Key Bypass Functions
- 11 Programming Instructions
- 12 User Codes
- 13 Master Codes
- 14 Sub-Master Codes
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CODELOCKS CL2000
Summary of Contents for CODELOCKS CL2000
- Page 1 Programming and Operating Instructions...
- Page 2 3 Within 3 seconds press the to another of the same length • A new code will be rejected if it For the CL2000 turning the key button 3 times. For CL2000 then the Sub-Master and all is already in the memory.
- Page 3 BATTERY FAILURE OVERRIDE 4. Clutch / Actuator connections. The CL2000 series has been designed so that a PP3 battery can be that used to open the lock should batteries fail. See image below. REM 1 is intended for use when there is a need to allow a visitor...
- Page 4 CODELOCKS CL4000 AND CL5000 LOCKS Removal of front-load Remove handle and Remove key from cylinder. Hold down the cylinder cover. control pin in the end of the cylinder and cylinders to change unscrew the cap. key bypass function, to repin cylinders,...
- Page 5 CHANGING KEY BYPASS FUNCTIONS Test the key operation. If the key is difficult to insert or tight when turning, then the cap maybe too tight. Loosen the cap one notch at a time and try the key again. If the Storeroom Function tailpiece allows key to turn 90º...
- Page 6 10 seconds is activated. Result: User Code at ID 05 suspended (•• when user 05 enters code) Note: On the CL2000 and CL4000 locks at the bottom of the keypad acts as the # button. The RESTORE USER CODE - PROGRAM 03...
- Page 7 ONE TIME USER CODE - PROGRAM 07 CANCEL EMERGENCY OPEN MODE - PROGRAM 11 #Master Code • • One time code ID (eg 81) • One time #Master Code • •• Code (eg 4321) •• Result: The emergency unlocked condition via REM 2 will Result: Code 4321 in position 81 will work once and then be cancelled and the lock will revert to normal operation be removed from memory...
- Page 8 Asia Pacific Europe Americas CODELOCKS (Australia) PTY LTD CODELOCKS HEADQUARTERS CODELOCKS INC US Tel: +44 (0) 1635 239645 Tel: +1 714 979 2900 Tel: +61 2 9882 1009 Fax: +61 2 9882 6030 Fax: +44 (0) 1635 239644 Fax: +1 714 979 2902 sales@codelocks.co.uk...
Need help?
Do you have a question about the CL2000 and is the answer not in the manual?
Questions and answers