CODELOCKS KL1000 Classic+ Programming And Operating Instructions

CODELOCKS KL1000 Classic+ Programming And Operating Instructions

Advertisement

Quick Links

Codelocks Support
KL1000 Classic+ - Programming and Operating Instructions
IMPORTANT: This guide is for the KL1000 Classic+ model. The standard KL1000 Classic Programming and Operating Instructions are
The KL1000 Classic+ is a compact digital lock based on the venerable KL1000 Classic, with the additional features of supporting up to 20 User Codes in Private Function and auto-opening in Public
Function. The lock is ideal for replacing keyed cam locks commonly supplied on a wide range of lockers, cabinets and cupboards.

Codes - The Basics

The KitLock has four code levels available:
i) Master Code
ii) Sub-Master Code
iii) User Code
iv) Technician Code
The KitLock is supplied with two factory set codes:

Master Code: 11335577

User Code: 2244
When fitted, immediately change the Master Code and User Code.
All Master Codes and Sub-Master Codes are 8 digits long.
All User Codes are 4 digits long.
All Technician Codes are 6 digits long.
The lock 'open' time is set at 4 seconds.
 

Functions

Before programming, select the most appropriate function for the application: A) or B) - See special Master Code set up commands.
A) PRIVATE USE Important Note: This is the default function and is already pre-programmed in new locks.
Once set, the User Code allows repeated unlocking of the lock. The lock will always re-lock automatically. This function is used for long term usage where a locker is typically allocated to an
individual. User Codes are 4 digits in length.
B) PUBLIC USE
The user enters their own personal four-digit code to lock the lock. Entering the same code will open the lock and clear the code, ready for the next user. This function is used for short term, multi
occupancy applications, e.g. a locker in a leisure centre. User Codes are 4 digits in length.
 

Operating Instructions

Note: The KitLock has a 10 button keypad and a # button.
The # button is hidden beneath the handle when in the locked position.
 
MASTER CODE
The Master Code can:
https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000
available
here.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KL1000 Classic+ and is the answer not in the manual?

Questions and answers

Summary of Contents for CODELOCKS KL1000 Classic+

  • Page 1 Codelocks Support KL1000 Classic+ - Programming and Operating Instructions IMPORTANT: This guide is for the KL1000 Classic+ model. The standard KL1000 Classic Programming and Operating Instructions are available here. The KL1000 Classic+ is a compact digital lock based on the venerable KL1000 Classic, with the additional features of supporting up to 20 User Codes in Private Function and auto-opening in Public Function.
  • Page 2 LOW BATTERY When the battery power is low the • Red LED will flash 3 times before the • Blue LED lights, accepting the code. Fit new batteries as soon as this happens. The lock will operate for 100 times with low battery.     BATTERY FAILURE OVERRIDE https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000...
  • Page 3 The Master User is effectively the administrator of the lock.  All programs are available to the Master User. CHANGE THE MASTER CODE #Master Code  •  01  •  New Master Code  • New Master Code  •• Example:  #11335577  •  01  •  12345678  • 12345678 •• Result:  Master Code has been changed to 12345678 https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000...
  • Page 4 Note:  A user can change their own code using the program below: #User Code  •  New User Code  •  New User Code  •• Example:  #1234  •  9876  •  9876  •• Result:  The user's code has now been set to 9876. https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000...
  • Page 5 The lock will remain open until the next user enters a 4 digit code. The user will not be required to confirm their code. Once entered, the lock will lock. Note:  On re-entry of the same 4-digit code, the lock will open. https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000...
  • Page 6 Note:  If NetCode is enabled prior to changing the keypad orientation, the lock will require re-initialisation after the orientation has been changed. ENGINEERING FUNCTIONS BATTERY LEVEL CHECK #Master Code  •  87  •• Example:  #11335577  •  87  •• Result:  Red and Blue LEDs will flash to indicate current battery status. https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000...
  • Page 7 Release 1 button & within three seconds, press 1 three times The Blue LED will flash twice and the lock will have reverted to the factory Master Code 11335577 and all other stored settings will be erased.     kITLOCK2020POI © 2020 Codelocks Ltd.  All rights reserved. https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000...

This manual is also suitable for:

Dnd-ddkl1000pssg-vertical

Table of Contents