Table of Contents
Advertisement
IMPORTANT
•
Never use screwdrivers or other utensils to remove the light cover.
This could damage the enamel of the oven or the lamp-holder. Remove only by hand
Never replace the bulb with bare hands as contamination from your fingers can
•
cause premature failure. Always use a clean cloth or gloves.
Please note:
The bulb replacement is not covered by your guarantee/warranty
Reversing the Door
This oven can be converted from left hand hinged to right hand hinged, if necessary. Door reversal should
be performed as part of the oven installation.
• Fully open the door.
• Remove the four A fixing screws from
the door hinge.
• Rest the door on a soft surface.
• Remove the four B fixing screws from
the trim plate and remove the trim
plate.
• Turn the trim plate 180⁰ and reattach it
on the opposite side using the four B
fixing screws.
• Turn the door 180⁰.
• Secure the door in its new position
using the four A fixing screws.
Ensure that the pivot pins
PLEASE NOTE:
and trim plate are correctly in position, and
that the oven door can be closed and opened.
A
A
B
B
17
B
B
A
A
Advertisement
Table of Contents
