Parmco PPOV-6S-SIDE-1 Installation And Operating Instructions Manual page 19

Table of Contents

Advertisement

Never clean the appliance with pressurized hot steam cleaner.
The oven chamber should only be washed with warm water and a small amount of washing
liquid.
Steam cleaning
 -pour 250ml of water (1 cup) into a bowl placed in the oven on the first level from the
bottom.
 -Close the oven door.
 -Set the temperature knob to 50℃, and the function knob to the bottom heater position.
 -Heat the oven chamber for approximately 30 minutes.
 -Open the oven door, wipe the chamber inside with a cloth or sponge and wash using
warm water with washing-up liquid.
After cleaning the oven chamber wipe it dry.
Caution!
Do not use cleaning products containing abrasive materials for the cleaning and
maintenance of the glass front panel.
Replacement of the oven light bulb
Before any maintenance is started involving electrical parts, the appliance must be disconnected
from the power supply.
If the oven has been in use, let the oven cavity and the heating elements cool down before
attempting any maintenance.
Changing the bulb
1. Unscrew the protective cover. We recommend that you wash and thoroughly dry the
glass cover at this point.
2. Carefully remove the old bulb and insert the new bulb suitable for high temperatures
having the following specifications: 220-240V, 50Hz, 25W, G9 fitting. Refit the
protective cover.
16

Advertisement

Table of Contents
loading

Table of Contents