Protocol Config - HORNER APG EXL10 OCS User Manual

13.2 Protocol Config

After opening Cscape, choose Program → Protocol Config, and select the port drop-down box to select
a protocol device driver. All protocol device drivers currently loaded in Cscape are displayed in the
dropdown selection. Some OCS models can be limited in the number of ports or number of protocol
device drivers that can be selected. Once a protocol is selected, the Network, Devices, and Data (Scan
List) must be configured through corresponding dialogs accessible through the respective buttons
(Network, Device, and Scan List.)
Three fields must be configured after a protocol is selected:
1. Network
2. Devices
3. Scan List
t h
A p r i l 2 4 , 2 0 2 0
Figure 13.1 – Protocol Config Dialog
MAN1029-08-EN_EXL10_UserManual
P a g e 118 | 191