Video Properties: Control - HORNER APG EXL10 OCS User Manual

16.4 Video Properties: Control

Trigger
The Video Properties: The video control trigger is used to start, stop and pause video.
Video trigger is done by bit level addressing. The trigger reserves eight (8) bits and uses the first two (2)
bits.
NOTE: The least significant bit is Bit 1.
Definitions are as follows:
System Register
The Video Control System Register provides the status of the Video Object. The status word is 16-bits
and should be viewed in hexadecimal format.
The status definitions are as follows:
0x0001
0x0002
0x00010
0x0020
t h
A p r i l 2 4 , 2 0 2 0
Figure 16.2 – Configuring Control
High = Start
Bit 1
Low = Stop
High = Pause
Bit 2
Low = Play
Video is currently playing
Video is paused
Channel number cannot be greater than 4
File not present or corrupted
MAN1029-08-EN_EXL10_UserManual
P a g e 147 | 191