Set Networks - HORNER APG EXL10 OCS User Manual

5.3

Set Networks

This sub menu allows setting for the CAN and Ethernet network to be viewed or changed.
Yes= CAN1 connected to a CAN network and functioning properly
CAN Ok?
No= Not ready to communicate on CAN network
CAN ID 1 to 253 = This node's CsCAN Network ID; must be unique on network
125kB = 125 kBd CAN network
CAN Baud
250kB = 250 kBd CAN network
MAC ID Displays the Ethernet MAC ID of the unit
IP Displays the Ethernet IP address of the unit
NetM Displays the Ethernet net mask of the unit
GatWy Displays the Ethernet gateway of the unit
NOTE: The IP address, Net Mask and Gateway can be changed from the System Menu. This is designed
for commissioning or temporary field changes. The actual parameters are defined in Cscape under the
Ethernet configuration and are reverted to whenever the unit goes from idle to run mode.
t h
A p r i l 2 4 , 2 0 2 0
MAN1029-08-EN_EXL10_UserManual
License Details
Server/ Users/ Pages/Data
Points/ Exp. Date/User
Logged In
500kB = 500kBd CAN network
1MB = 1 MBd CAN network
P a g e 28 | 191