View I/O Slots - HORNER APG EXL10 OCS User Manual

5.7

View I/O Slots

The View I/O Slots Sub-Menu displays three System Settings, none of which may be edited.
Internal to the EXL10 OCS, there is a CPU board, and up to two installed modules. Model 0 has no
installed I/O or COM modules. All other models have an I/O module and can have a user-installed COM
module.
Depending on which I/O module is installed and which I/O module has been configured by Cscape, one
of the following six System Settings should appear for Slot 1:
Slot 1: I/O: Empty
Slot 1:*Unsupported
Slot 1:-I/O Missing
Slot 1:+I/O: XExyy
Slot 1:?I/O: XExyy
Slot 1: I/O: XExyy
Depending on the COM module that is installed and the COM module that has been configured by Cscape,
one of the following six System Settings appears for Slot 2:
Slot 2: I/O: Empty
Slot 2:*Unsupported
Slot 2:-I/O Missing
Slot 2:+I/O: XzC
Slot 2:?I/O: XzC
Slot 2: I/O: XzC
Slot 3: I/O: ETN300
t h
A p r i l 2 4 , 2 0 2 0
= No I/O module installed or configured
= Unsupported I/O module installed
= No I/O module installed but an I/O module is configured
= yy I/O module installed but no I/O module configured
= yy I/O module installed but another I/O module configured
= yy I/O module installed and configured properly
= No COM module installed or configured
= Unsupported COM module installed
= No COM module installed but a COM module is configured
= z COM module installed but no COM module configured
= z COM module installed but another COM module configured
= z COM module installed and configured properly
= ETN300 has been configured through Cscape
MAN1029-08-EN_EXL10_UserManual
P a g e 32 | 191