Table of Contents
Advertisement
5 - SHIPPING - DELIVERY - HANDLING
NB: Terms such as "pending unwrapping" and "unit damaged but packaging in good condition" are not admissible by
insurance companies.
For any other problem, your contact will be able to explain the relevant procedure.
5.4 - Instructions for lifting and handling
■ All of our units are supplied with lifting lugs.
■ All lifting and handling operations must be carried out in accordance with the standards and regulations applicable to the handling
location and using standardised equipment.
■ When handling, use lifting straps with a sufficient lifting capacity. Do not use damaged straps. Use a lifting beam adapted to the
size of the unit to prevent the straps from exerting pressure on the unit, its accessories or the roof.
■ When handling with a pallet truck or fork lift, make sure the forks are long enough to avoid damaging the casing. The forks must
project beyond the other side of the block.
WARNING:
The blocks must only be connected after handling and during installation.
It is forbidden to handle connected blocks unless they are fully supported by a suitable common structure.
Lifting and handling a block
Lifting the unit on a packaged unit frame
■ 2 endless round slings:
■ 4 endless round slings:
11
Advertisement
Table of Contents
