Table of Contents
Advertisement
5 - SHIPPING - DELIVERY - HANDLING
Packaged unit on a frame:
5.6 - Storage
■ Do not remove the original packaging.
■ Do not remove the protective caps until you are ready to connect the coils.
■ The unit must be stored on a flat surface.
■ Fit protection against shocks or impacts, which could damage the unit or its accessories.
■ Store the blocks in their packaging, in a dry area sheltered from the weather.
■ The ambient temperature must be between -10°C and 50°C.
■ To facilitate the assembly of multisplit units, their components must be kept in the relevant groups. Refer to the dimensional drawings
and marker labels on each block (see opposite).
B
Acknowledgement of receipt number.
C
Block markings.
A1, A2, ....A9: multi-section unit.
A second unit will be marked B1, B2,.... B9.
The numbers 1, 2 and 3 do not necessarily indicate the order of assembly (refer to the dimensional drawing).
D
Internal production order = The serial number should be quoted in all correspondence.
E
Internal designation.
F
Customer name.
G
Pre-shipping internal inspection.
H
Customer reference.
I
Weight of corresponding block.
J
Block year of manufacture.
K
Manufacturer's name and address.
14
Ø35
L
L
ORDER NUMBER
00001003
B
OF02376570
D
DESIGNATION:
E
F
CUSTOMER:
H
REFERENCE:
MASS
I
K
BLOCK
A1
C
Packing conformity
G
YEAR OF MANUFACTURE
J
2016
50
Advertisement
Table of Contents
