Table of Contents
Advertisement
1 - GENERAL INFORMATION
■ Thank you for choosing our air handling unit. The design and construction of your unit are the fruit of all the expertise offered by
our company's teams of technicians.
1.1 - Intended use
■ The air handling units are designed for use indoors or outdoors (canopy and roof option mandatory)
■ The units are intended to provide ventilation and, depending on the composition:
- Filtration of normal quality air,
- Filtration of air in sterile environments (special version for clean rooms),
- Air heating and/or cooling,
- Air humidification and/or dehumidification,
- Heat evacuation or recovery,
- Filtration and handling of particularly moist and/or contaminated air (special versions, e.G. For extracting air from swimming pools
or kitchens),
- Or a combination of the above characteristics.
■ Any use other than that described above is deemed improper.
■ If necessary, check whether your units are compatible with the applications for which you intend to use them.
■ The manufacturer is not responsible for damage resulting from improper use.
■ The user shall be held solely responsible.
■ Your machine's specific operating conditions are set out in the contract review.
■ The standard machine is designed to operate in urban and industrial environments with class C3 moderate pollution in accordance
with standard ISO 12944. Other options are available on request for more polluted environments or coastal areas.
■ WARNING: Take into account the quality of the ambient air and the conditioned air.
■ WARNING: The sharp increase in the air pressure when the fire damper is closed may cause irreversible damage to the
plate heat exchangers.
1.2 - Documentation
■ This manual contains all of the installation and operating instructions for your unit. This document must be read in full before carrying
out any work on the unit. This manual must be kept in the immediate vicinity of the unit. It does not cover the entire installation.
■ Please read all of the documents supplied with your order for information concerning the installation and system start-up steps.
■ Depending on the options selected, specific handbooks may be included with this manual, and are also available from your
manufacturer. You should also read these handbooks before installing any options or carrying out any work (e.g. speed variator,
humidifier, control, etc.).
■ Devices installed and used in ATEX zones are marked with this symbol
limits of use and the precautions to be taken when installing, starting up and maintaining these devices. Refer to this section before
installing or carrying out any work.
1.3 - Warranty
■ See general terms and conditions of sale.
■ Any modification made to the unit by persons other than the manufacturer's employees, or without prior consent, shall result in
cancellation of the warranty.
4
. A specific section of this manual is dedicated to the
Advertisement
Table of Contents
