Table of Contents
Advertisement
5 - SHIPPING - DELIVERY - HANDLING
5.1 - Shipping instructions
■ Our units must be shipped in their original packaging and in the position in which they will be used.
- Blocks must not be stacked.
- Transshipment is not permitted.
■ During shipping, the load must be lashed to the truck bed to prevent the unit from
moving and being damaged.
- Lashing must follow accepted industry practice, using straps made from
standardised synthetic fibres (EN12195-2), clearly marked and labelled and in
perfect condition.
- Leave a space of at least 100 mm between the 2 units.
- Use anti-slip blocks under the unit's feet.
- We recommend top-over lashing. The straps must be tensioned manually,
enough to hold the equipment securely on the truck bed without damaging.
Do not use mechanical implements such as levers, bars, etc., unless the tensioning device is specially designed for use with
such implements.
5.2 - Container shipment
■ The container dimensions must be adapted to those of the unit being shipped.
■ Slide the unit onto the container floor. When using a fork lift, place a spacer between the frame and the fork lift to prevent damage
to the unit's casing and accessories.
■ The straps are fed through the lifting lugs on the frame to remove the unit from the container:
- Remove the unit from the container by pulling the 2 straps.
■ Depending on the size and configuration, the units can be shipped in one or more blocks.
■ Units supplied assembled on a frame:
- Steel mounts and pads, painted red, underneath the frame are used for removing the unit from the container and must be removed
before positioning it on site.
■ Do not lift the unit by its accessories.
5.3 - Delivery
■ Upon delivery of the unit components, inspect the consignment in the presence of the driver. If any damage is observed, or if the
delivery is incomplete, indicate this in the usual way on the delivery note and confirm to the carrier by registered letter within three
days of the delivery date and send a copy to us. Take photographs of any damage.
■ Delivery of stacked blocks: in the case of an outdoor unit or with control option, the cable raceways are supplied not fitted, and can
be found between the blocks on the upper panel (see image below).
10
Stacking of AHU_150 to 1350
POSITION OF RACEWAYS
DURING SHIPPING
75° to 90°
Advertisement
Table of Contents
