ADJ ELEMENT Series User Instructions page 25

Table of Contents

Advertisement

S Y S T E M M E N U
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from: Color Fade, Color Change, and both Color
Change and Color Fade modes running together. The running speed is adjustable in all 3 modes.
1.
Plug in the fixture and press the MODE button until either "AFXX," "AJXX," or "A-JF" is displayed.
AFXX - Color Fade mode. There are 16 Color Fade modes to choose from. Use the UP or DOWN
buttons to scroll through the different Auto Fade modes.
AJXX - Color Change mode. There are 16 Color Change modes to choose from. Use the UP or
DOWN buttons to scroll through the different Auto Change modes.
A-JF - Both Color Fade and Color Change modes running.
After selecting your desired running mode, press the SETUP button until "SP.XX" is displayed. This
2.
allows you to adjust the running speed of your desired program. Use the UP or DOWN buttons to set
the speed between "SP.01" (slowest) and "SP.16" (fastest). Once you have set the desired running
speed, press the SETUP button to return to your selected Auto Run mode.
DMX Mode:
Operating through a DMX controller gives you the freedom to create your own programs tailored to your
individual needs. The Element HEXIP has 5 DMX modes: 6 channel mode, 7 channel mode, 8 channel
mode, 11 channel mode, and 12 channel mode.
1.
To run the fixture in DMX mode, press the MODE button until "d.XXX" is displayed. "XXX" represents
the current displayed DMX address.
Use the UP or DOWN buttons to select your desired DMX address, then press the SETUP button
2.
to choose your DMX Channel mode.
3.
Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel modes are
listed below:
To run the 6 Channel Mode, press the MODE button until "Ch06" is displayed.
To run the 7 Channel Mode, press the MODE button until "Ch07" is displayed.
To run the 8 Channel Mode, press the MODE button until "Ch08" is displayed.
To run the 11 Channel Mode, press the MODE button until "Ch11" is displayed.
To run the 12 Channel Mode, press the MODE button until "Ch12" is displayed.
4.
After selecting your desired DMX address and channel mode, connect the fixture to any standard
DMX controller using XLR connections.
Dimmer Curve:
The dimmer curve determines the dimming behavior of the fixture when used in DMX mode. Refer to
the dimmer curve chart.
1.
Plug in the fixture and press the MODE button until "d.XXX" is displayed. "XXX" represents the
current displayed DMX address.
Press the SETUP button until "dr-X" is displayed. "X" represents the current displayed dimmer curve
2.
setting (0-4).
0: Standard
1: Stage
2: TV
3: Architectural
4: Theatre
3.
Use the UP or DOWN buttons to scroll through and select your desired dimming curve.
25

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELEMENT Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents