Note
You can use this function to position the spindle at a specific angle, e.g. during a tool
change.
• A stationary spindle is positioned via the shortest possible route.
• A rotating spindle is positioned as it continues to turn in the same direction.
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
4.
Enter the desired spindle stop position.
The spindle position is specified in degrees.
5.
Press the <CYCLE START> key.
The spindle is moved to the desired position.
Working in manual mode
3.2 Selecting a tool and spindle
83