Siemens SINUMERIK 840D sl Operating Manual page 116

Machining the workpiece
4.10 Editing a program
Note
Replacing texts
• Read-only lines (;*RO*)
If hits are found, the texts are not replaced.
• Contour lines (;*GP*)
If hits are found, the texts are replaced as long as the lines are not read-only.
• Hidden lines (;*HD*)
If hidden lines are displayed in the editor and hits are found, the texts are replaced as
long as the lines are not read-only. Hidden lines that are not displayed, are not replaced.
See also
Editor settings (Page 121)
116
3. In the "Text" field, enter the term you are looking for and in the "Replace
with" field, enter the text you would like to insert automatically during the
search.
4. Position the cursor in the "Direction" field and choose the search
direction (forward, backward) with the <SELECT> key.
5. Press the "OK" softkey to start the search.
If the text you are searching for is found, the corresponding line is
highlighted.
6. Press the "Replace" softkey to replace the text.
- OR -
Press the "Replace all" softkey to replace all text in the file that
corresponds to the search term.
- OR -
Press the "Continue search" softkey if the text located during the search
should not be replaced.
- OR -
Press the "Cancel" softkey when you want to cancel the search.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal