Setup Data - Siemens SINUMERIK 840D sl Operating Manual

Managing programs

9.16 Setup data

9.16 Setup data
Apart from programs, you can also save tool data and zero point settings.
You can use this option, for example, to backup the required tools and zero point data for a
specific G code program. If you want to execute this program at a later point in time, you will
then have quick access to the relevant settings.
Even tool data that you have measured on an external tool setting station can be copied
easily into the tool management system using this option.
Note
Backing up setup data from part programs
Setup data from part programs can only be backed up if they have been saved in the
"Workpieces" directory.
For part programs, which are located in the "Part programs" directory, "Save setup data" is
not listed.
Backing up data
Data
Tool data
Magazine assignment
Zero points
Basic zero points
Directory
File name
Note
Magazine assignment
You can only read out the magazine assignments if your system provides support for loading
and unloading tool data to and from the magazine.
264
No
•
• Complete tool list
Yes
•
No
•
No
•
The selection box "Basis zero point" is hidden
All
•
No
•
Yes
•
The directory is displayed, in which the selected program is located.
Here you have the option of changing the suggested file names.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal