③ Camera Link Cable; ④ Frame Grabber Board; ⑤ Dc In Connection Cable (Option, Ev And Uv Models Only); ⑥ Ac Adapter (Power Supply, Option, Ev And Uv Models Only) - JAI GO-5000M-PMCL-1 User Manual

③ Camera Link Cable
Connect the Camera Link cable to the Mini Camera Link connector.
Use a cable that supports the Camera Link standard and is compatible with Mini Camera Link
l
(SDR) connectors.
Refer to the specifications of the cable for details on its bend radius.
l
For details on the cable, see
l
Caution: Refer to
connectors.
④ Frame Grabber Board
Refer to the operating instructions of the frame grabber board and configure settings on the computer
as necessary. (Use a computer that meets the requirements of your frame grabber board).
⑤ DC IN Connection Cable (Option, EV and UV Models Only)
Provides the power supply to the camera.
Notes:
The DC In connector is available only on the EV and UV camera.
l
A power supply is not required when using PoCL.
l
⑥ AC Adapter (Power Supply, Option, EV and UV Models Only)
Connect the AC adapter and the round connector of the connection cable to the DC IN connector on
the camera.
Note: The AC adapter is not required when using PoCL.
GO-5000M-PMCL-1 | GO-5000M-PMCL-EP-1 | GO-5000M-PMCL-UV-1
③ ④ Camera Link Connector 1 and
Notes on Camera Link Cable Connections
User Manual (Ver. 1.0) - Preparation
when connecting the cables to the
- 20 -
2.