Table of Contents
Advertisement
PART II: INSTALLATION
Siemens VGD SKPx5 (Auxiliary-optional micro switch)
Actuator connection
Gas valveGas Filter (if provided)
The gas filters remove the dust particles that are present in the gas, and prevent the elements at risk (e.g.: burner valves, counters and
regulators) from becoming rapidly blocked. The filter is normally installed upstream from all the control and on-off devices.
ATTENTION: it is reccomended to install the filter with gas flow parallel to the floor in order to prevent dust fall on
the safety valve during maintenance operation.
Once the train is installed, connect the gas valves group and pressure switches plugs.
Overall dimensions (mm) -
405
AGG 5.310
Speed Sensor
is a speed sensor kit used to monitor the speed of a motor. This kit is used to mount the speed sensor directly on the motor casing.
ON-OFF
BURNERS WITH INVERTER VARIANT (if provided)
Valve drive
Plug connection
(only with SKPxx.xx1xx)
A Valve closed
238
20
End of stroke
Plug connection
POC
3
2
1
Advertisement
Table of Contents
