Unigas G335A Installation Manual page 14

PART II: INSTALLATION
MOUNTING AND CONNECTING THE BURNER
Transport and storage
If the product must be stored, avoid humid and corrosive places. Observe the temperatures stated in the burner data table at the begin-
ning of this manual. The packages containing the burners must be locked inside the means of transport in such a way as to guarantee
the absence of dangerous movements and avoid any possible damage.
In case of storage, the burners must be stored inside their packaging, in storerooms protected from the weather. Avoid humid or corro-
sive places and respect the temperatures indicated in the burner data table at the beginning of this manual.
Packing
The burners are despatched in wooden crates whose dimensions are:
1600mm x 1000mm x 860 mm (L x P x H)

Such packages fear moisture and are not suitable for stacking.Packing cases of this type are
affected by humidity and are not suitable for stacking.
The following are placed in each packing case:These packagings are damaged by moisture
and the maximum number of overlapping packagings indicated on the outside of the packa-
ging may not be exceeded.
burner with detached gas train;

gasket or ceramic fibre plait (according to burner type) to be inserted between the burner

and the boiler;
envelope containing this manual and other documents.

oil flexible hoses;

To get rid of the burner's packing, follow the procedures laid down by current laws on disposal
of materials.
Handling the burner
WARNING! The handling operations must be carried out by specialised and trained personnel. If these
operations are not carried out correctly, the residual risk for the burner to overturn and fall down still
persists. To move the burner, use means suitable to support its weight (see paragraph "Technical spec-
ifications").
The unpacked burner must be lifted and moved only by means of a fork lift truck.
The burner is mounted on a support provided for handling the burner by means of a fork lift truck: the forks must be inserted into the A
anb B ways. Remove the stirrup only once the burner is installed to the boiler.
PART II: INSTALLATION
A
14
H
P
B
L