You can select different interfaces by clicking the seven buttons shown in the
navigation bar on the left side of the window. The detailed descriptions are as
follows.
•
•
•
•
•
•
•
2.7.2.2 Using Sockets
ITECH instruments have SCPI socket services, which can be used to send and
receive SCPI commands, queries, and query responses. All commands must
be terminated with a newline for the message to be parsed. All query responses
will also be terminated with a newline.
Home: Web home interface, displays the model and appearance of the
instrument;
Information: displays the serial number of the instrument and more system
information as well as LAN configuration parameters;
Web Control: enables the Web control to begin controlling the instrument.
This page allows you to monitor and control the instrument;
LAN Configuration: reconfigure the LAN parameters;
Security: change the password and control access to the Web interface;
Manual: go to the ITECH official website and view or download the relevant
documents;
Logout: logout the Web interface.
The instruments allow up to six simultaneous socket connec-
tions to be made.
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
31
Need help?
Do you have a question about the IT-M3131D and is the answer not in the manual?