Compaq ProLiant 850R Setup And Installation Manual page 90

Continued
Model 1 Includes IDE
cable for IDE CD-ROM, a
SCSI cable, and a 68 to
50 pin adapter.
Wide-Ultra SCSI PCI
Controller, or SMART-2/P
Array Controller , or
SMART-2SL Array
Controller
Wide-Ultra and Fast- Fast SCSI-2 Non Hot-Plug
Wide SCSI Non Hard Drives
Hot-Plug Hard Drives
No additional cables are No additional cables are
required. required.
Detach the four device Detach the four device Wide
Wide terminated cable terminated cable from the
from the Feature Board. Feature Board.
Attach the four device Attach the four device
Wide terminated cable Wide terminated cable
to the 68-pin controller to the 68-pin controller
connector. connector.
Attach the 1.5" Wide Attach the 1.5" Wide
terminated cable terminated cable
(PN 281882-001) to the (PN 281882-001)
"internal" 68-pin to the "internal" 68-pin
connector on the Feature connector on the Feature
Board. Board.
Attach the four device Attach the 68-50 pin
Wide terminated cable adapter to the Wide
to the devices. terminated cable and at the
device.
Order Option Kit
PN 212055-001 if more
than one adapter is required.
2/8 Dat Drive, 4/16
TurboDat Drive,
SCSI CD-ROM
No additional cables are
required.
- Detach the four device
Wide terminated cable
from the Feature Board.
- Attach the four device
Wide terminated cable to
the 68-pin controller
connector.
- Attach the 1.5" Wide
terminated Wide cable
(PN 281882-001) to the
"internal" 68-pin
connector on the Feature
Board.
- Attach the 68-50 pin
adapter to the Wide
terminated cable and at
the device.
- Order Option Kit
PN212055-001 if more
than one adapter is
required. Note: These
options are not supported
by the SMART-2/P Array
Controller or SMART-2SL
Array Controller.
3-39