Compaq ProLiant 850R Setup And Installation Manual page 80

Drive Bay Hardware Installation Options
Position Drive Bay
Identifier Description
0 3.5" wide x
1" height
bay
1 3.5" wide x
1" height
bay
2 5.25" wide x
1.6" height
bay
3 5.25" wide x
1.6" height
bay
4 5.25" wide x
1" height
bay
Drive Installation Guidelines
When adding SCSI hard drives to your ProLiant 850R server, observe the
following guidelines:
A maximum of seven SCSI devices per controller may be added.
Each SCSI drive must have a unique address.
Compaq SCSI cables for the ProLiant 850R server are terminated. Be
sure to remove all terminating jumpers from third-party SCSI devices.
Supported Compaq SCSI options are not terminated.
Table 3-1
Standard Optional Hardware Installation
Hardware
Installed
1" height hard drive
A standard
3.5-inch
diskette drive
CD-ROM drive diskette drive (3.5-inch or 5.25-
inch), tape drive in the top position,
or 1.6" height hard drive
An optional CD-ROM drive, diskette
drive (3.5-inch or 5.25-inch), tape
drive, or 1.6" height hard drive
1" height hard drive
3-29