Download
Share
Print this page
Compaq 5000 Series Replacing Manual
  1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Computer Hardware
  5. 5000 Series
  6. Replacing manual
Compaq 5000 Series Replacing Manual

Compaq 5000 Series Replacing Manual

Hide thumbs Also See for 5000 Series:

Advertisement

Quick Links

Download this manual
Replacing a Microprocessor
5000 and 7000 Series
End-User Replaceable Parts Program

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Compaq 5000 Series

Summary of Contents for Compaq 5000 Series

  • Page 1 Replacing a Microprocessor 5000 and 7000 Series End-User Replaceable Parts Program...
  • Page 3 All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.

  • Page 4: Replacing A Microprocessor

    Replacing a Introduction Microprocessor Your Compaq Internet PC has an Easy Access panel that makes accessing the internal parts easy. This document The Microprocessor describes how to remove and replace the microprocessor (sometimes called a (see Figure 1-1). “processor”) inside your...

  • Page 5: Tools Needed

    Compaq. Your replacement part is warranted for the longer of 90 days from the date the part was delivered to you, or the original One Year Limited Warranty that came with your Compaq Presario. Preparing Your Computer for Disassembly...

  • Page 6: Disconnecting The Power

    I. Disconnecting the Power 1. Turn off the computer using the Power button (see Figure 1-2). Figure 1-2 2. Disconnect the power cord from the electrical outlet 1 and computer 2 (see Figure 1-3). Failure to disconnect the power from the computer may result in personal injury.
  • Page 7 II. Opening the Side Access Panel 1. Remove the screw 1 securing the side access panel. Locate the latch 2 directly below the screw, press down, and hold in the down position (see Figure 2-1). You do not have to replace the screw securing the side access panel.
  • Page 8 III. Locating the Microprocessor/Heatsink Assembly See the illustration below for the location of the heatsink 1, Microprocessor 2, microprocessor interface 3, and heatsink power supply cable 4 (see Figure 3-1). Look at the replacement part carefully to help identify and locate the component to be replaced.
  • Page 9 IV. Removing the Microprocessor/Heatsink Assembly To remove the Microprocessor/heatsink assembly, complete the following procedure: 1. Turn the computer on its side (open side facing up) and locate the microprocessor/heatsink assembly (see Figure 4-1). 2. Disconnect the heatsink power supply cable (see Figure 4-1).
  • Page 10 3. Disconnect the clip holding the heatsink and microprocessor in place by pushing down 1 on the tab and pushing outward 2 on the bottom portion of the tab to release (see Figure 4-2). Figure 4-2 EPLACING A ICROPROCESSOR...
  • Page 11 4. Lift the lever holding the microprocessor to the microprocessor interface until you hear and feel a slight click (see Figure 4-3). THIS STEP MUST BE COMPLETED BEFORE REMOVING THE MICROPROCESSOR AND HEATSINK. Figure 4-3 5. Lift the microprocessor/heatsink assembly from the microprocessor interface (see Figure 4-4).
  • Page 12 V. Replacing the Microprocessor/Heatsink Assembly To replace the microprocessor/heatsink assembly, complete the following procedure: Note: Save all the packing materials received with your replacement part. You will need them to return the defective part. 1. Align the Microprocessor pins 1 with the microprocessor interface 2 on the system board (see Figure 5-1).
  • Page 13 4. Re-attach the metal clip that also holds the Microprocessor/heatsink assembly into place. 5. Reconnect the heatsink power supply cable to the system board (see Figure 5-2). Figure 5-2 EPLACING A ICROPROCESSOR...
  • Page 14 VI. Replacing the Side Access Panel Align the tabs on the top and bottom of the side access panel with the slots (located on the top and bottom edge) of the chassis and slide the side access panel into place (see Figure 6-1).
  • Page 15 Replacing procedures. 4. If you are still experiencing problems, contact Compaq Support: 1-800-984-9350. VIII. Returning the Defective Part Please refer to the Compaq Part Return Instructions that came with your replacement part for instructions on returning the defective part. EPLACING A...
  • Page 16 198671-001 www.compaq.com...

This manual is also suitable for:

7000 series