Compaq ProLiant 850R Setup And Installation Manual page 70

5. Use your thumbs to brace slightly on the module, while at the same time
pushing the latches outward with your index fingers until the latches
snaps open.
6. As the socket latches spread open, the module comes out of the socket.
7. Remove the module from the socket on the System Board, as shown
below.
Figure 3-20.
Installing a Processor Power Module In
Socket 1
Follow these steps to install a Processor Power Module in socket 1:
1. Align the key slot in the bottom edge of the Processor Power Module
with the tab in the expansion slot. The module will not seat if turned the
wrong way.
Removing a Processor Power Module
3-19