Compaq ProLiant 850R Setup And Installation Manual page 57

3-6 Installing Hardware Options
Figure 3-6.
5. Replace the retaining screw.
6. Replace the server cover.
7. To reconfigure the server refer to Chapter 4. "Server Configuration
Utilities."
To install an expansion board on side B of the Riser Board, follow the steps
listed below.
IMPORTANT: When using NetWare as your operating system, you can NOT install
a SCSI board in slot 4 located below the Feature Board slot.
1. Remove the Server from the rack and remove the server cover. Refer to
Chapter 2, "Server Installation Overview," for details.
Side A
Installing a board into an expansion slot