Compaq ProLiant 850R Setup And Installation Manual page 86

WARNING: Any RJ-45 receptacle marked with these symbols
indicates a Network Interface Connection. To reduce risk of electrical
shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
WARNING: To reduce the risk of electrical shock or damage to your
!
equipment, do not disable the power cord grounding feature. This
equipment is designed to be connected to a grounded (earthed) power
outlet that is easily accessible to the operator. The grounding plug is an
important safety feature.
CAUTION: Before connecting the power cord and peripheral devices,
verify that the AC Voltage Select Switch on the rear of the server next to the
power cord connector is set correctly to your local line voltage (either 115
or 230 volts). A reminder label that covers the power cord connector
must be removed to install the power cord. If the AC Voltage Select Switch
is not properly set, the server will be damaged when power is applied.
CAUTION: Be sure that the power outlet you plug your power cord into is
easily accessible and located as close as possible to the equipment
operator. When disconnecting power to the equipment, be sure to unplug
the power cord from the power outlet.
IMPORTANT: Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step or trip on them. Do not pull on a cord or cable.
When unplugging cords from the electrical outlet, grasp the cord by the plug.
3-35