Connections - ABB Tina 3A Product Manual

5

Connections

Tina 3Aps
only
Connection cables
to mechanical contacts and power supply (Tina 3Aps only)
Brown
Blue
Green
Orange
M12 5-pole male connector, A-coded
to DYNlink safety circuit
1 Brown
2 White
3 Blue
4 Black
5 Grey
Note!
Caution!
Warning!
Warning!
Warning!
2TLC172125M0201 Rev.F
Brown
Blue
Green (x2)
Orange (x2)
+24 VDC (Tina 3Aps only)
0 VDC (Tina 3Aps only)
Safety loop A1-A2
Safety loop B1-B2
+24 VDC
DYNlink signal input
0 VDC
DYNlink signal output
Information output
See connection cable cross section area and cable length in chapter
'Technical data/General'.
All cable colors according to ABB standard cables.
Information output signals shall never be used for safety purpose(s).
The connection cables are not monitored and shall therefore be installed
within the same physical enclosure as the safety device to maintain the
highest safety level (fault exclusion, refer to EN ISO 13849-2:2012, Annex D).
The safety loops shall not be used for purposes other than intended. All
tampering with safety loops can lead to serious risk to life.
M12 5-pole male connector
8