Connections - Abb Tina 2B Original Instructions Manual

3

Connections

5-pole connection cables:
1 ) Brown:
2 ) White:
3 ) Blue:
4 ) Black:
5 ) Grey:
NB: The connection cable cross section area is 0.34 mm
Caution! The connection cables should not be extended as longer cables increase the risk for electrical
interference.
Warning!
The information channel output shall never be used for the safety purpose(s).
The connection cables are not monitored and must therefore be installed within the same physical enclosure as the
safety device to maintain the highest safety level (fault exclusion, refer to EN ISO 13849-2:2003 Annex D).
The safety adaptor shall not be used for purposes other than intended. All loading or tampering with the device can
lead to serious risk of life.
2TLC172121M0201, rev. A
2011-09-20
+24 VDC
Dynamic signal input
0 VDC
Dynamic signal output
Information
2
and cable length is 150 mm.
6 www.abb.com/lowvoltage