Connections - ABB Tina 2A Product Manual

Adapter unit

Hide thumbs Also See for Tina 2A:

Table of Contents

Connections

Connection cables

to DYNlink safety circuit

1 Brown

2 White

3 Blue

4 Black

5 Grey

Note!

Warning!

2TLC172121M0201 Rev.E

+24 VDC

DYNlink signal input

0 VDC

DYNlink signal output

Information output

See connection cable cross section area and cable length in chapter

'Technical data/General'.

Information output signals shall never be used for safety purpose(s).

The connection cables are not monitored and shall therefore be installed

within the same physical enclosure as the safety device to maintain the

highest safety level (fault exclusion, refer to EN ISO 13849-2:2012, Annex D).

The safety adapter shall not be used for purposes other than intended. All

tampering with the safety device can lead to serious risk to life.

Table of Contents

Tina 2b