Table of Contents
Advertisement
5. BATTERY CHARGING AND
CARE
5.1 CHARGING THE BATTERY
Follow the below procedure step by step.
1. Turn the power switch to [OFF]
2. Connect the charger's power cord to a
power outlet.
3. Open the charging socket cap on the
scooter tiller and connect the charger to
the socket.
4. Switch [ON] the charger.
5. The charger's red and orange LED's will be illuminated when charging begins. The
minimum charging duration is 6 hours however it is recommended to charge for at least
10 hours for optimum performance. Do not charge for more than 24 hours.
6. The charger's LED's will turn green when charging is complete.
7. Switch [OFF] the charger, disconnect the power cord and the round plug from the
charging socket on the scooter.
WARNING!
•
The fan inside the charger will be activated accordingly when you turn on the
charger. If the fan does not work when connected to the charger or the green
light is not showing, DO NOT use this charger. It may lead to overheating of
the charger and cause a fire as a result.
•
There is a red LED present on the charger to illustrate operation. If this LED
does not illuminate the charger is defective, please contact your dealer.
P. 19
Advertisement
Table of Contents
