Table of Contents
Advertisement
6.3 BATTERY, FUSE AND TYRE
Battery
Refer to the section entitled " 5.2 BATTERY" in "5. BATTERY CHARGING AND CARE ".
Fuse
If the battery charger is turned on and no LED's are lit, the fuse may be at fault.
Suggestion
Ask for help from your scooter dealer to inspect or replace the fuse, since the tiller
shroud has to be removed first before you can replace the fuse.
Tyres
The condition of the tyres depends on how you drive and use your scooter.
•
Inspecting tyre tread
•
Please check the tread depth regularly. Replace the tyres when the tread depth is less
than 0.5 mm.
ATTENTION!
1. When tread depth is below 0.5mm it can easily lead to scooter slippage, longer
braking distance. Therefore replace the tyres as early as possible when they do not
have insufficient tread depth.
2. The tyre pressure should be kept at about 26 PSI (approx. 1.8KG/cm) for the best
ride and handling.
ATTENTION!
When conducting maintenance of your scooter, please turn the power switch to OFF
and remove the charger cords.
P. 24
Advertisement
Table of Contents
