Charging Your Mobility Scooter; Charging Via Battery; Charging Via Tiller - CareCo X-GO ADVANCE User Manual

MS03010024
PRODUCT CODE

CHARGING YOUR MOBILITY SCOOTER

CHARGING VIA BATTERY

1. Lift the plastic cover behind the footplate
to reveal the charging socket.
2. Insert the charger's 3-pin output to the
socket on the battery pack.
3. Insert the outlet plug into a wall socket.
4. Switch [ON] the wall socket.
5. Charge for 8-12 hours.
When charging is complete, remove the
charger from the socket, and remove the plug
from the wall outlet.

CHARGING VIA TILLER

1. Lift the plastic cover on the tiller to reveal
the charging socket.
2. Insert the charger's 3-pin output to the
charging socket.
3. Insert the outlet plug into a wall socket.
4. Switch [ON] the wall socket.
5. Charge for 8-12 hours.
When charging is complete, remove the
charger from the socket, and remove the plug
from the wall outlet.
SUGGESTION Ensure the scooter is switched [OFF] before charging.
20