Battery Charging And Care - CareCo X-GO ASTRO User Manual

6. BATTERY CHARGING AND CARE

The battery pack can be charged either when it is installed or removed from the scooter.
To Charge
2. Plug the charger's power cord into
the mains.
3.
(see next section for details)
4. Pull the end of the rubber cover on
photo). Then connect the charger's
round plug into the charging socket
(2)
5. Switch on the plug socket at the
mains.
The battery pack can be charged
on-board the scooter. Alternatively,
the battery pack can be removed from
the scooter and be charged away from
the scooter.
To Remove the Battery Pack
ignition.
2. Lift the scooter battery pack up by
the handle (see below).
2
P. 13