Advertisement
Problem
Poor overall performance.
Max Sealer Plus not creating
a mound or too small of a
mound.
Max Sealer Plus is not closing
the knife track.
TROUBLESHOOTING
Cause
Toolbar not adjusted correctly
Speed too slow.
Blades are not set
aggressively enough
Toolbar is not level-probably
nose down
Blades are not set aggressive
enough.
Solution
Adjust the toolbar so that
during operation it is level.
Operate at 5mph min.
Increase the angle of the front
edge of blade to the row.
Level toolbar.
Curved blades the "cup"
should be in toward the knife.
Increase the angle of the front
edge of the blade.
15
Advertisement
