Page 5
TE 60-A36 Original operating instructions ........
Page 7
Comply with the operating instructions Instructions for use and other useful information Dealing with recyclable materials Do not dispose of electric equipment and batteries as household waste Hilti Liion battery Hilti charger 1.2.3 Symbols in illustrations The following symbols are used in illustrations: These numbers refer to the illustrations at the beginning of these operating instructions.
Diameter Direct current (DC) Li-ion battery Hilti Li-ion battery type series used. Observe the information given in the section headed In- tended use. The product supports wireless data transmission compatible with iOS and Android platforms. Never use the battery as a striking tool.
Page 9
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany Safety General power tool safety warnings WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Page 10
▶ Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. ▶...
Page 11
▶ Never tamper with or modify the product or accessories in any way. ▶ Use auxiliary handles supplied with the product. Loss of control can cause personal injury. ▶ Apply appropriate safety measures at the opposite side of the workpiece in work that involves breaking through.
Page 12
The product can also be used for light- to medium-duty chiseling on masonry and surface finishing work on concrete. ▶ Use only Hilti Li-ion batteries from the B 36 series with this product. ▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section. Items supplied Combihammer, side handle, operating instructions. Other system products approved for use with this product can be found at your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com Technical data...
Total vibration Hammer drilling in concrete (a B 36/5.2 LiIon 9.0 m/s² h, HD Chiseling in concrete (a B 36/5.2 LiIon 8.6 m/s² h, Cheq Uncertainty (K) 1.5 m/s² Operation Preparations at the workplace Switch the product off or remove the battery before making adjustments or changing accessories. Observe the safety instructions and warnings in this documentation and on the product.
Page 15
1. Apply a little grease to the connection end of the accessory tool. ▶ Use only genuine Hilti grease. Using the wrong grease can result in damage to the product. 2. Push the accessory tool into the chuck as far as it will go (until it engages).
(e.g. by being dipped in water or left in the rain). If a battery has been soaked by moisture, treat it as a damaged battery. Isolate it in a non-flammable container and consult Hilti Service. • Keep the battery free of extraneous oil and grease. Do not permit dust or dirt to accumulate unnecessarily on the battery.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with your product can be found at your Hilti Store or online at: www.hilti.group...
Page 18
Remove the battery and keep it under observation. Allow it to cool down. Contact Hilti service. The product is overloaded (appli- ▶ Select a product that is suitable cation limit exceeded). for the intended purpose.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Need help?
Do you have a question about the TE 60-A36 and is the answer not in the manual?
Questions and answers