Setting The Overload Protection Devices - Seca 378 Service Manual

Replacement
seca 674, 675

1.3 Setting the overload protection devices

 To protect the scale from overload, four overload protection devices are provided.
Set the specified values for the relevant model in accordance with the table (Table 1);
use gauges for this purpose.
The settings must be very accurate to prevent a forced shunt.
Model
634/635/644/645
664/665
674/675
676/677
684/685
Table 1: Dimensions to be set for the overload protection device for multi-function scales
Figure 4: Setting the overload protection devices
08.02.2013/MRE
Dimension x =
7 mm
3.5 mm
7 mm
3.5 mm
7 mm
Seite 7 (9) 30-34-00-859_E1