Software Intended Purpose; Installation And Start - Seca 378 Service Manual

Software

5 Software intended Purpose

The radio modules
[374|376|378|703|704|284|285|634|635|644|645|656|657|664|665|674|675|676|
677|684|685|954|957|959|963] as well as the seca 360° wireless USB adapter
[456] contain software to control wireless communications. This software can be
updated using the Windows-based "seca wireless updater" program. Removing
or replacing the radio modules is generally not required.
The Windows program "seca wireless updater" has three functions:
 The configuration of the selected wireless group is displayed.
 A set-up process can be performed.
 The software in the radio modules or in the wireless USB adapter can be
updated.
Updating a wireless USB adapter takes approximately 30 seconds, updating a
radio module in a device can take up to five minutes, depending on the quality
of the wireless transmission, but typically takes 1.5 minutes.
.
5.1

Installation and Start

The seca wireless
installed on a
notebook using
installation program (Setup). The
latest version of the radio module
software is copied to the PC
together with the installation.
You can display
numbers of the PC software and the
radio module software installed on
the PC. To do so, select the menu
item "Help" -
updater". Example:
14.11.12/RLEU/ARI/MRE
of the
updater is
service PC or
a Windows
the version
"About wireless
30/40
devices with NEC2
seca
electronics
30-34-00-812c