Taurus RB10.5 Pro Assembly And Operating Instructions Manual page 20

Step 5: Mounting the handles and backrest
1. Insert the backrest (119) into the main frame (1) and secure with three screws (15), three
washers (16), and three spring washers (9).
2. Connect the cables (37L & 18) and the cables (37R & 18) (see fig. 4-1).
3. Attach the handles with the hand pulse sensors (36) to the main frame (1) with two screws (41)
and two curved washers (8).
4. Place the bottle holders (20) in the holders of the handles with the hand pulse sensors (36).
5. Attach the front handlebar (72) to the front post (17) with two screws (41) and two curved
washers (8).
6. Place the cover (42) on the front handlebar (72) on the screw connection.
20
RB10.5