Changing Lights - privileg SY-6010BS-P1-C83-L41-600 User Manual

Page EN-12 Care and maintenance
7. Allow the fleece grease filter (6) to dry
thoroughly.
8. Place the dry fleece grease filter (6) on
the inside of the metal grease filter.
9. Fasten the fleece grease filter with the
two retaining wires. It is best to snap
these on to the closed side first.
10. Re-insert the metal grease filter (2) and
secure it in place with the sliders.
11. Connect the mains plug to a properly in-
stalled socket.

Changing lights

CAUTION
Risk of injury!
If the lighting no longer works, the
■
LED may only be replaced by an au-
thorised service technician.
Note for the service technician:
This exhaust hood requires an
LED with the ILCOS D-Code DBS-
2.5/65-H-120/33, 220-240 V~, 2.5 W.
(2)