privileg SY-6010BS-P1-C83-L41-600 User Manual page 36

Page EN-14 Assembly
1. Remove the metal cover (2) and carefully
put it aside.
2. Hold the exhaust hood under the wall
unit.
How close you can hang the exhaust
hood to the wall depends on the depth of
the wall unit. The ventilation grilles (11)
must remain clear and must not be cov-
ered.
3. Mark the drill holes using a pencil.
(3)
(4)
(4)
(5)
4. Screw on the exhaust hood as shown in
the diagram above.
This is the final step for the substructure.
Continue with section „Final Steps" (see „Fi-
nal steps" on page EN-16).
Wall mounting
WARNING
(2)
Risk of injury!
Improper installation of the appliance
can lead to injury.
Before drilling the holes, ensure that
■
no wires or cables (power, gas, water
(11)
etc.) will be damaged (check with a
line locator).
CAUTION
Fire hazard!
The distance between the cooking
■
surfaces and the lower edge of the
hood must be at least 70 cm for gas
and electric stoves, 80 cm for coal
and oil-fi red stoves.
For gas stovetops, you must read the
■
user manual for the stovetop! If the
manual stipulates a larger distance,
this must be observed.
The ventilation grilles must remain
■
clear.
The screws and wall plugs required to
mount the appliance on a wall are not
included in the package contents as
their type and dimensions will vary depend-
ing on the characteristics of the wall.
Please have a specialist advise you as to
which ones you need.