8. Attach it with the two retaining wires. It is
best to snap these on to the closed side
first.
9. Place the cover (6) back on and secure
it with the sliders.
10. Connect the mains plug to a properly in-
stalled socket.
Care and maintenance
Changing the lighting
CAUTION
Risk of injury!
If the LED ceases to work, it must be
■
changed by an authorised service
technician.
Note for the service technician:
This exhaust hood requires an LED
with the ILCOS D-Code
(6)
DBS-2.5/65-H-120/33, 220-240 V~,
2,5 W.
Page GB-13